Tech. Spec. Info :
Cisco WRP400 vezeték nélküli szélessávú útválasztó 2 telefonos porttal / Tiszta,kiváló minőségű hangkommunikáció / Faxüzenetek küldésének támogatása / Tömeges telepítésre is készen áll / Fejlett "triple-play" szolgáltatásokat nyújtó eszköz
Cisco WRP400 vezeték nélküli szélessávú útválasztó 2 telefonos porttal gyártói weboldalCisco WRP400 vezeték nélküli szélessávú útválasztó 2 telefonos porttal
Műszaki adatok
Hardware· One 10/100 802.3/u (RJ-45) WAN interface
· Four 10/100 802.3/u (RJ-45) LAN interfaces
· Integrated 802.11b/g wireless access point
· Two FXS RJ-11 interfaces
· One USB 2.0 port (support for Mobile Broadband Modem** - available separately)
· Reset button/restore factory defaults
· LEDs: Power, Internet, Ethernet, Wireless, Phone(s), WPS
· Power: external, 5V DC, 2A (full range switching power adapter)
· Wi-Fi Protected Setup (WPS) button
Software· Static and dynamic routing (Routing Information Protocol [RIP] 1, RIP 2)
· Auto failover and recovery of Ethernet WAN connection enabled with USB Mobile Broadband Modem**
· Multicast pass-through
· Denial-of-service (DoS) prevention
· Web based configuration
· VPN pass-through with IP Security (IPsec), Layer 2 Tunnelling Protocol (L2TP), and Point-to-Point Tunneling Protocol (PPTP)
· Event logging
· Dynamic Host Configuration Protocol (DHCP) server
· Access control lists
· Universal Plug and Play (UPnP)
· Password-protected configuration or management sessions for web access
· Remote management (Session Initiation Protocol [SIP] SUBSCRIBE and NOTIFY message; use NOTIFY message to reset the box remotely) and remote web management
· Internet Group Management Protocol (IGMP) multicast and IGMP snooping (versions 1, 2, and 3) support
· 802.1p prioritization QoS support
· Differentiated Services (DiffServ), type of service (ToS) classification
· Network edge (DMZ) hosting
· Wi-Fi Protected Access (WPA) and WPA2
· Wi-Fi Multimedia (WMM)
· Dual service set identifiers (SSIDs)
Voice· SIP v2, RFC 3216
· Sending SIP messages via User Datagram Protocol (UDP)/TCP
· G.711a, G.711u, G.729, G.726 codecs
· G.711 pass-through
· Echo cancellation (G.167 and G.168)
· Dynamic jitter buffer
· Simple traversal of UDP through Network Address Translation (NAT) (Serial Tunnel [STUN], RFC 3489)
· Session Description Protocol (SDP), RFC 2327
· Real Time Protocol (RTP)/Real Time Control Protocol (RTCP) over UDP
· Three-way conferencing
· Remote firmware upgrade
· Dual-tone multifrequency (DTMF) tone detection and generation
· Voice activity detection (VAD)
· Silence suppression
· Comfort noise generation (CNG)
· Caller ID generation and detecting (frequency shift keying [FSK] and DTMF)
· Media loopback
· SIP Transport Layer Security (TLS)
· SIP channels support both UDP and TCP transport
· Support for 2 simultaneous T.38 or G.729 calls
· T.38 fax relay, including V.17, V.21, V.27ter, and V.29 and fax pass-through (pulse code modulation [PCM})
· T.38 support is dependent on fax machine and network/transport resilience*
Package Contents· Cisco WRP400 Wireless-G Broadband Router with 2 Phone Ports
· Setup CD-ROM with Norton Internet Security
· Documentation on CD-ROM
· Ethernet cable
· Power adapter
· Quick installation
Minimum Requirements· High-speed Internet connection (cable/DSL/other)
· Activated VoIP service
Dimensions W x H x D
5.51 x 5.51 x 1.06 in.
(140 x 140 x 27 mm)
Weight
10.05 oz (285 g)
Power
External, switching 5V DC 2A
Certification
FCC, CE, CB, IC, UL, Wi-Fi (802.11b + WPA2, 802.11g + WPA2, WMM)
Operating temperature
32° to 104°F (0° to 40°C)
Storage temperature
-4° to 158°F (-20° to 70°C)
Operating humidity
0% to 85%, relative humidity, noncondensing
Storage humidity
5% to 90%, noncondensing