16GB DDR3 Memória 1600MHz CL10 2x8GB KINGSTON HyperX Fury HX316C10FK2_16 Technikai adatlap

Tech. Spec. Info : 16GB, 1600MHz, LO-DIMM DDR3, Dual Channel KIT


JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
· VDDQ = 1.5V (1.425V ~ 1.575V)
· 800MHz fCK for 1600Mb/sec/pin
· 8 independent internal bank
· Programmable CAS Latency: 11, 10, 9, 8, 7, 6
· Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
· 8-bit pre-fetch
· Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
· Bi-directional Differential Data Strobe
· Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
· On Die Termination using ODT pin
· Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
· Asynchronous Reset
· PCB : Height 1.180” (30.00mm), double sided component

Memória eladás, értékesítés a hivatalos magyarországi márkaképviselet támogatásával.